The AI/AOI Cobot Application-Auto Parts
The customer needs
-Use cobot to replace human being to inspect all the holes on Auto parts
Why need Cobot do this job
-it is a very monotonous Job, Long run of such job done by human being could cause their vision tired and stained so that mistakes would easily occur and health would be harmed definitely.
Solutions
-Our Cobot solutions integrate powerful AI and AOI function to the on-board vision so as to easily recognize and calculate the dimensions & tolerance on parts inspected just in seconds. Meanwhile to utilize Landmark technology to locate the part which needs to be inspected, so that the robot could find the part exactly where it locates.
Stong points
-You may not need any extra and/or add-on equipment to the cobot, very short set up time and easier to understand how to set and operate it. AOI/AI function could be used separately from the cobot body.
The Mobile Manipulator For CNC Higher precision load and unload
The customer needs
-Use mobile cobot to replace human being to load, unload and transport the parts in workshop, even working 24 hours, which aims to improve productivity and relief increasingly employment pressure.
Why need Mobile Cobot do this job
-it is a very monotonous Job, and this is not meaning that the workers salary is lower, as they would need to know how to operate the sorts of CNC machines
-Less workers in the shop and improve productivity
-Cobot is safer than industrial robot, can be mobile anywhere via. AMR/AGV
-Flexible deployment
–Easy to understand and operate
Solutions
-by the customer needs in details, we offer a cobot with on-board vision set up on a AMR of laser guide, the AMR would transport the cobot close to the CNC unit. AMR stops, the cobot will shot the landmark on the CNC body firstly to acquire accurate coordinate information, then the cobot will go to the place where exactly locates in CNC machine to pick up or sending the part.
Stong points
-due to AMR travel and stop accuracy normally is not good, like 5-10mm,thus only depending on the AMR working precision definitely can not meet the entire and final operation of load and unload precision
-Our cobot could meet the precision by landmark technology to reach the final Combined accuracy for load and unload at 0.1-0.2mm
–You shall not need extra expense, energy to develop a vision system for this job.
-can realize to keep your workshop 24 hours running with some positions.
The Cobot to Drive Screw on the Vehicle Seat
The customer needs
-Use cobot to replace human being to inspect and drive the screws on vehicle seats
Why need Cobot do this job
-it is a very monotonous Job, that means Easy to make mistake through Human being with long time operation.
-Cobot is light and easy to set up
-Has on-board vision
-there is a screw pre-fix position before this cobot position, Cobot will help inspect if any mistake from pre-fix
Solutions
-Set up easily a cobot beside the seat assembly line
-Use Landmark technology to locate the seat and the cobot will know where to go
Stong points
-The cobot with on-board vision will save your time & money to integrate any extra vision on it
- Ready made for your use
-Higher definition of the camera on board
-could realize 24hours running
-Easy to understand how to use the cobot and set up.
The Cobot to Pick up the test tubes from a Flexible Supply system
The customer needs
-Use cobot to replace human being to inspect and pick up and sort the test tubes
Why need Cobot do this job
-it is a very monotonous Job
-normally such job requests higher payment employees, normally working in hospital, labs.
-easy to make mistake by human being, any mistake would create disaster.
Solutions
-Use a Cobot with on-board vision and a Flexible material disc supplier, and a camera to scan the barcode on the test tubes
-Even in some scenario, the customers request a Mobile manipulator to transport the test tubes between different positions in lab or hospital.
Stong points
-You may not need any extra and/or add-on equipment to the cobot, very short set up time and easier to understand how to set and operate it.
- could realized 24 hours continuous operation and be used in the scenario of blacklight lab.
Semi Conductor Wafer Transportation
Our Solution
-Mobile Manipulator(MOMA) is one of the most important development trends of robot in near future, which is just like to attach legs to cobot to make it travel easily, freely and swiftly. The TM cobot is the best option for Mobile Manipulator, as it is able to precisely orient and guide the robot to go to the accurate position for all the subsequent actions through its international patent technology, Landmark and built-in vision, which would definitely save a lot of your time and expense on vision’s R&D.
MOMA is very swift, and shall not be limited to the work room and place, Meanwhile, to securely interactive with human being working in the same room through cobot, sensor, laser radar, pre-set route, Active obstacle avoidance, the optimized algorithm etc. MOMA definitely shall complete tasks of transportation, loading and unloading during different work stations remarkably
TM Mobile Manipulator advantage
-Fast Set up, no need much room
-Automatically plan the route with the laser radars and optimized algorithm
-Collaborative with between human being and robot
-Easily programming to flexibly meet future’s needs
-Unmanned technology, On-Board battery
-24 hours unattended operation through automated charge station
-Realized the switchover between different EOAT for the robot
-By built-in vision on the cobot arm, no need to spend extra time and expense to set up the vision for the cobot
-By built-in vision and Landmark technology(TM cobot’s patent),To realize precisely the orientation and the motion